CHINESE JOURNAL OF ENERGETIC MATERIALS
+Advanced Search

Preparation and Performance of Low Detonation Velocity Emulsion Explosives Used in Explosive Welding
Author:
Affiliation:

(School of Chemical Engineering, Anhui University of Science and Technology, Huainan 232001, China)

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
    Abstract:

    In order to make the properties of emulsion explosive satisfy the requirements of explosive welding, emulsion matrix, foam and carbonate mineral powder were mixed to prepare a kind of emulsion explosive with low detonation velocity.The microstructure, fluxion property and mechanical sensitivity were tested, the effect of charge diameter on detonation velocity was studied, and the explosive welding test on stainless steel-steel plate was tested.Results show that the internal of explosive have interspaces, shapes of particle are irregular, and have a good fluxion property, and the sensitivities of impact and friction are both zero.When the loading density of explosive is 0.81 g·cm-3, the actual measured brisance is 9.71 mm, and when the charge diameter is 16-50 mm, the detonation velocity is 1754-2439 m·s-1.The explosive can satisfy the requirements of explosive welding of metal plate.

    Reference
    Related
    Cited by
Article Metrics
  • PDF:
  • HTML:
  • Abstract:
  • Cited by:
Get Citation

黄文尧,张凯,吴红波,等.低爆速爆炸焊接乳化炸药的制备与性能[J].含能材料,2013,21(3):357-362.
HUANG Wen-yao, ZHANG Kai, WU Hong-bo, et al. Preparation and Performance of Low Detonation Velocity Emulsion Explosives Used in Explosive Welding[J]. Chinese Journal of Energetic Materials,2013,21(3):357-362.

Cope
History
  • Received:January 05,2013
  • Revised:February 28,2013
  • Adopted:March 05,2013
  • Online: June 24,2013
  • Published: