CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
孔隙率对PBX热导率影响的数值模拟
作者:
作者单位:

(中国工程物理研究院化工材料研究所, 四川 绵阳 621900)

作者简介:

韦兴文(1977-),硕士,助研,主要从事炸药及高分子材料表征与研究。e-mail: weixw@caep.ac.cn

通讯作者:

基金项目:

国家自然科学基金(10832003); 化工材料研究所创新基金(626010947)


Numerical Simulation of the Porosity Influence on Thermal Conductivity of Polymer Bonded Explosive
Author:
Affiliation:

(Institute of Chemical Materials, CAEP, Mianyang 621900, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    采用代表体积元建模方法, 建立了与实际高聚物粘结炸药(Polymer Bonded Explosive, PBX)细观结构高度相近、能反映炸药颗粒和微孔隙随机分布、可以任意调整填充率和孔隙率的有限元计算模型, 并计算分析了孔隙率对PBX热导率的影响。结果表明, 随着孔隙率增大, PBX的有效热导率呈指数减小。

    Abstract:

    A representative volume element (RVE) model was developed to investigate the thermal conductivity of three-phase polymer bonded explosive (PBX), and the fraction and distribution of the fillers and pores were taken into consideration. The influence of porosity on the thermal conduction of PBX was analyzed. Results show that the thermal conduction of PBX decreases exponentially with the increase of porosity.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

韦兴文,李明,周筱雨,等.孔隙率对PBX热导率影响的数值模拟[J].含能材料, 2013, 21(5):681-683. DOI:10.3969/j. issn.1006-9941.2013.05.024.
WEI Xing-wen, LI Ming, ZHOU Xiao-yu, et al. Numerical Simulation of the Porosity Influence on Thermal Conductivity of Polymer Bonded Explosive[J]. Chinese Journal of Energetic Materials, 2013, 21(5):681-683. DOI:10.3969/j. issn.1006-9941.2013.05.024.

复制
历史
  • 收稿日期: 2012-12-06
  • 最后修改日期: 2013-03-16
  • 录用日期: 2013-03-19
  • 在线发布日期: 2013-10-12
  • 出版日期: