CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
单模块装药膛内流场特性试验及数值仿真
作者:
作者单位:

南京理工大学 能源与动力工程学院, 江苏 南京 210094

作者简介:

通讯作者:

基金项目:


Experiment and Simulation of Flow Field Characteristics for Single Modular Artillery Charge System
Author:
Affiliation:

School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    模块装药是目前大口径加榴炮主要的装药结构之一。为了更加精确地研究单模块装药膛内燃烧的内弹道特性,分析膛内燃气流动及压力波变化规律,设计了模块装药燃烧模拟试验平台,并进行了单模块装药的膛内燃烧试验。根据模块装药的特点,分区域建立了模块装药轴对称二维两相流内弹道模型。基于高阶精度MUSCL(Monotonic Upstream-centered Scheme for Conservation Laws)格式,数值模拟了单模块装药药室内部点传火过程。结果表明,计算结果与试验结果吻合较好,不同测试点的压力曲线的计算峰值误差均低于4%,表明所建立数学模型和使用的计算方法能够较好地描述单模块装药药室内部燃烧过程。结果还发现,在t=5.0 ms前,由于模块未破裂,药盒端盖的阻隔导致主装药燃气无法及时向药室扩散,仅传火管燃气对膛内流场造成微弱的影响,这一时期药室内部压力最大值比传火管右端未破膜前仅上升约4.3%;当模块破裂后,模块与药室边界处存在3.05 MPa的压力梯度,使得火药燃气及固相颗粒沿轴向快速向药室自由空间流动,在弹丸底部区域形成较强反射压力波;随着时间的推移,压力波反复震荡,并逐渐减弱。

    Abstract:

    Modular artillery charge system (MACS) is one of the main charge structures for large-caliber howitzers. To accurately study the interior ballistic characteristics of single modular artillery charge system and analyze the variation law of gas flow and pressure wave in the chamber, a combustion experiment platform for MACS was designed to carry out the combustion experiment of single modular artillery charge system. According to the characteristics of modular artillery charge system, the axisymmetric two-dimensional two-phase flow interior ballistic model of modular charge was constructed in different regions. Based on the high-order accurate Monotonic Upstream-centered Scheme for Conservation Laws (MUSCL), the numerical simulation of the ignition process of single-module charge was carried out. The results show that the calculated results are in good agreement with the experimental results. The calculated maixmum errors of the pressures at different test points are less than 4%, indicating that the mathematical model established and calculation method used can describe the combustion process of single modular artillery charge system well. The results also show that before t=5.0 ms, the combustion of the module cartridge has little effect on the internal flow field of the module. The gas of main propellant can"t diffuse into the charge chamber in time due to the obstruction of the end cover of the cartridge.Only the gas of the ignition tube has a certain effect on the flow field in the chamber. The maximum pressure in the chamber during this period is about 4.3% higher than that before the right end of the fire tube is not broken. After the rupture of the cartridge, there is a pressure difference of 3.05 MPa at the boundary between the cartridge and the chamber, so that the propellant gas and solid particles flow rapidly along the axial direction to the free space of the chamber. A strong reflection of the pressure wave is formed at the bottom of the projectile. After that, the pressure wave oscillates repeatedly and gradually weakens.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

马天一,陶如意,森思义,等.单模块装药膛内流场特性试验及数值仿真[J].含能材料, 2023, 31(1):70-82. DOI:10.11943/CJEM2022198.
MA Tian-yi, TAO Ru-yi, SEN Si-yi, et al. Experiment and Simulation of Flow Field Characteristics for Single Modular Artillery Charge System[J]. Chinese Journal of Energetic Materials, 2023, 31(1):70-82. DOI:10.11943/CJEM2022198.

复制
历史
  • 收稿日期: 2022-07-31
  • 最后修改日期: 2022-10-18
  • 录用日期: 2022-09-26
  • 在线发布日期: 2022-09-29
  • 出版日期: 2023-01-25