CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
装填密度和燃烧压力对炮用发射装药附着性燃烧残渣的影响
作者:
作者单位:

南京理工大学化工学院

作者简介:

乔丽洁(1969-),女,博士研究生,主要从事含能材料的清洁燃烧研究。e-mail: qiaojie624@126.com

通讯作者:

基金项目:


Effect of Charge Density and Combustion Pressure on Adhesiveness Combustion Residue of Gun Propellant Charges
Author:
Affiliation:

School of Chemistry and Engineering,Nanjing University of Science and Technology,

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    用密闭爆发器试验研究了单基、三基发射药在不同装填密度(0.05~0.20 g·cm-3)、不同试验压力(49~105 MPa)和不同装药量的点火药(黑火药和清洁点火药(CBI))的附着性燃烧残渣量。比较了试验结果和靶场射击结果。结果表明,随着装填密度和燃烧压力的增加,附着性燃烧残渣减少。CBI点火药使发射药燃烧残渣量减少。用密闭爆发器得到的三基药附着性燃烧残渣是单基药的1.6倍; 靶场射击试验中,三基药的附着性燃烧残渣是单基药的1.5倍,表明两种结果基本一致。

    Abstract:

    The closed bomb test was used to study the amount of adhesiveness combustion residue of single-based gun propellant and triple-based gun propellant under the conditions of different charge density(0.05-0.20 g·cm-3),different test pressure(49-105 MPa) and different igniter(black powder and CBI powder) with different ignition charge. The experimental and tested results in firing field were compared. The results show that as the charge density and combustion pressure increase,the combustion residue decrease and that the CBI powder makes adhesiveness combustion residue decrease. The adhesiveness combustion residue of triple-based gun propellant in closed bomb test is 1.6 times greatly than that of single-based gun propellant,and one in firing field is 1.5 times greater than that of single-based gun propellant,showing the experimental results agree with tested results in firing field.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

乔丽洁,堵平,王泽山.装填密度和燃烧压力对炮用发射装药附着性燃烧残渣的影响[J].含能材料, 2011, 19(5):561-564. DOI:10.3969/j. issn.1006-9941.2011.05.018.
QIAO Li-jie, DU Ping, WANG Ze-shan. Effect of Charge Density and Combustion Pressure on Adhesiveness Combustion Residue of Gun Propellant Charges[J]. Chinese Journal of Energetic Materials, 2011, 19(5):561-564. DOI:10.3969/j. issn.1006-9941.2011.05.018.

复制
历史
  • 收稿日期: 2011-06-21
  • 最后修改日期: 2011-07-13
  • 录用日期: 2011-06-29
  • 在线发布日期: 2012-02-22
  • 出版日期: