CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
贴隔板法在尾翼EFP成型中的应用研究
作者:
作者单位:

作者简介:

通讯作者:

基金项目:


The Application Study of Affixed Cover in Forming Process of EFP with Fins
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 支撑附件
    摘要:

    采用LS-DYNA对在药型罩上粘附隔板结构形成带尾翼型爆炸成型弹丸(explosively formed projectile,EFP)进行三维数值模拟,从药型罩微元压跨速度和压力的角度初步探讨了形成尾翼型EFP的机理,对同一直径的大锥角型、球缺型和弧锥结合型药型罩形成的尾翼型EFP进行了对比分析,三种结构药型罩均能形成较为明显的尾翼,其中大锥角型药型罩得到的EFP速度最高。数值计算结果表明,EFP尾翼数与药型罩上所粘贴的隔板数一致,三种不同结构药型罩上粘贴四个隔板,得到的尾翼数均为四个。通过实验,对贴隔板法形成尾翼EFP做了进一步验证,实验结果与数值模拟结果基本一致。

    Abstract:

    The explosively formed projectile(EFP) with fins for a cover charge structure by LS-DYNA software which four covers were conglutinated on the liner was studied by three-dimensional numerical simulation. The mechanism of forming EFP with fins was discussed based on the curves of velocity and pressure vs time of the liners. A contrastive analysis was carried out on the three kinds of liners which include big-cone shaped liner, imperfect-sphere shaped liner and arc-cone shaped liner. Results show that three kinds of liners can form obvious fins and the velocity of the big-cone shaped liner is the fastest. The experimental results agree with the simulational results basically.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

林加剑,沈兆武,任辉启.贴隔板法在尾翼EFP成型中的应用研究[J].含能材料, 2009, 17(5):588-593. DOI:10.3969/j. issn.1006-9941.2009.05.021.
LIN Jia-jian, SHEN Zhao-wu, REN Hui-qi. The Application Study of Affixed Cover in Forming Process of EFP with Fins[J]. Chinese Journal of Energetic Materials, 2009, 17(5):588-593. DOI:10.3969/j. issn.1006-9941.2009.05.021.

复制
历史
  • 收稿日期: 2009-01-19
  • 最后修改日期: 2009-06-25
  • 录用日期: 2009-05-21
  • 在线发布日期: 2009-10-15
  • 出版日期: 2009-10-25